Psion Teklogix 7535 G2 Manual de usuario descargar pdf (Pagina 69)

Chapter 3: Getting To Know Your 7535 G2

The Battery

Psion Teklogix 7535 G2 Hand-Held Computer User Manual 39

3.1 The Battery

The hand-held operates with a lithium-ion battery pack. Preparing the unit for operation re-

quires that a battery pack be charged and installed in the 7535 G2.

3.1.1 Battery Safety

3.1.2 Removing And Installing The Battery Pack

Removing The Battery Pack

• If your unit is equipped with a hand strap, unhook it from the base of the battery.

• Press down the release tab at the top of the battery, and slide the battery out.

Installing The Battery Pack

To install the battery pack:

• Slide the battery pack with the contoured plastic facing you into the 7535 G2. Click the

battery into place.

Important: Before attempting to install, use or charge the battery pack, it is critical that

you review and follow the important safety guidelines in the section entitled

“Lithium-ion Battery Safety Precautions” on page xxiv

Important: Always switch the unit off before changing the battery. If you do not turn

the hand-held off before removing the battery, it may be necessary to reboot

the unit. Any active sessions may be lost. While the battery is being

replaced, the 7535 G2 will save its current data for up to 20 minutes.

Note: If your hand-held is equipped with a battery contact protective gasket

(P/N 1020250), to remove the battery, you will need to hold the 7535 G2 face down

with both hands, making certain that your fingers are not touching the keypad.

Press down firmly on the battery release with both thumbs and slide the battery out.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 371 372

Sin comentarios

Psion Teklogix 7535 G2 Manual de usuario Pagina 69