Psion Teklogix 7535 G2 Manual de usuario Pagina 151

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 372
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 150
Chapter 5: Configuration
Power Management Properties
Psion Teklogix 7535 G2 Hand-Held Computer User Manual 121
The Estimated Battery Backup is the amount of battery power that has been reserved or set
aside to protect data until a charged battery can be installed in the 7535 G2. When the
battery capacity is depleted up to the Estimated Battery Backup reserve specified in the
Suspend Threshold menu, the 7535 G2 shuts off automatically and uses the reserve power to
preserve the data stored on the computer. Once the 7535 G2 shuts down, it cannot be
switched on until a fresh battery is installed, or the unit is inserted in a docking station
or cradle.
•Slide the Suspend Threshold button to the right to increase the battery capacity
reserved for backup purposes. Data will be preserved to a maximum of 124 hours.
•Slide the Suspend Threshold button to the left to decrease the power reserved for
backup purposes; this increases the 7535 G2 operating time—the amount of time the
unit will operate before shutting down—but reduces the power reserved for backup pur-
poses to a minimum of 24 hours.
Internal super-capacitors will protect the data stored in the 7535 G2 while the battery is
swapped for a fully charged one.
Important: Selecting Maximum backup time will reserve approximately 20% of the
battery capacity for memory backup. Once the battery is drained, the system
RAM memory is lost and the unit must cold boot.
In most real-time transaction environments this is not a problem (it only
takes a few seconds to cold boot). Batch transaction environments, where
data is not saved to a non-volatile memory (such as an SD FLASH card),
may need to pay particular attention to this parameter. Psion Teklogix does
not recommend the storage of any valuable data in system RAM.
The 7535 G2 Windows CE 5.0 environment does not store any critical data
in RAM (such as the registry or file system).
If your application does not save data to RAM, Psion Teklogix recommends
keeping the Suspend Threshold setting as low as possible to maximize
battery run time.
Important: Once the battery is removed, the super-capacitors will preserve the data
stored on the 7535 G2 for approximately 5 minutes. It is critical that you
install a charged battery before this time elapses.
Vista de pagina 150
1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 371 372

Comentarios a estos manuales

Sin comentarios