Psion Teklogix 7535 G2 Manual de usuario descargar pdf (Pagina 160)

Chapter 5: Configuration

Devices

130 Psion Teklogix 7535 G2 Hand-Held Computer User Manual

To add a service to the Outgoing port, an active service must first be deactivated. Then you

can choose the Outgoing option from the Activation menu (highlight a service, right-click

or press the [SPACE] bar to display the Activation menu).

The Authentication and Encryption options can be changed only before activation. To

change these after activation, deactivate the service first, then change the options.

Once a service is activated, all the information regarding the service, including the

RFCOMM channel number, is saved in the registry. (Some remote devices may change their

RFCOMM channel numbers when they reboot, so your saved setting may not work when

the remote device is rebooted. In that case, you must deactivate the service and reactivate it

to detect the current RFCOMM channel.)

Set PIN

PINs can be set for each device by pressing the Set PIN button in the Devices menu, or you

can skip this step and try to connect to the device first.

• Highlight a device, click on the Set Pin button, and type the PIN.

You will receive a message, either that the PIN has been successfully validated or that it has

been rejected.

If the PIN has been validated, an asterisk (*) appears in the PIN column in the Devices list

box, indicating that this device has a PIN set. Once a PIN is entered, it is saved in

the registry.

To remove the PIN:

• Choose Set PIN, and press [ENTER].

If the 7535 G2 attempts to connect to a remote device that has Authentication enabled and

does not have a required PIN set, an Authentication Request dialog box appears.

• Enter the PIN, and tap on OK to connect the devices.

Important: The remote device must have authentication enabled, otherwise the PIN

authentication will fail.

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 371 372

Sin comentarios

Psion Teklogix 7535 G2 Manual de usuario Pagina 160