Psion Teklogix 7535 G2 Manual de usuario descargar pdf (Pagina 319)

Psion Teklogix 7535 G2 Hand-Held Computer User Manual C-47

Appendix C: Bar Code Settings

Imager

Code 128

Include Check

If this parameter is enabled, the check digit is included with the decoded bar code data.

Length Restriction

Refer to “Length Restriction” on page C-14 for details.

Add/Remove Data

Refer to “Add/Remove Data” on page C-15 for details.

C.4.4 Code 128

Enabled

Set this parameter to on to enable “Code 128.

Length Restriction

Refer to “Length Restriction” on page C-14 for details.

Add/Remove Data

Refer to “Add/Remove Data” on page C-15 for details.

C.4.5 EAN 13

Enabled

Set this parameter to on to enable “EAN 13”.

Addendum

An addendum is a separate bar code, supplementary to the main bar code. This parameter

provides three options: Disabled, Optional and Required. Depending on the value chosen

for this parameter, an addendum is recognized or ignored.

• Double-tap on Addendum to display a dialog box listing your options.

• Highlight an item, and tap on OK.

When “Addendum” is set to Disabled, the scanner does not recognize an addendum. If this

parameter is set to Optional, the scanner searches for an addendum and if one exists,

appends it to the main bar code. When the parameter is set to Required, the scanner does not

accept the main bar code without an addendum.

Note: Setting “Addendum” to ‘Optional’ reduces performance. It should only be chosen if

at least some of the bar codes being read have addendums.

1 2 ... 314 315 316 317 318 319 320 321 322 323 324 ... 371 372

Sin comentarios

Psion Teklogix 7535 G2 Manual de usuario Pagina 319