Psion Teklogix 7535 G2 Manual de usuario descargar pdf (Pagina 261)

Appendix B: SCU For RA2041 802.11b/g Radio

SCU Tabs

Psion Teklogix 7535 G2 Hand-Held Computer User Manual B-3

B.1 SCU Tabs

This appendix provides details about each tab in the Summit Client Utility (SCU). For

quick, step-by-step setup instructions, refer to “Summit Client Utility (SCU) For RA2041

802.11b/g Radio” on page 28.

The following sections provide a detailed description of each of the tabs available in the

SCU—Main (below), Profile (page B-4), Status (page B-9), Diags (page B-9), and Global

(page B-10).

B.1.1 Main

The Main tab is displayed when you tap on the Start>Programs>SCU icon.

• Enable/Disable Radio: Enables or disables the radio. This is a toggle button; when the

radio is enabled, this button reads Disable Radio, and when the radio is disabled, the

button reads Enable Radio.

• Active Profile: Lists the name(s) of the active configuration profile(s). When a profile

is chosen from the Active Profile drop-down menu, the settings for that profile become

active.

If ThirdPartyConfig is selected, after the 7535 G2 goes through a power cycle, WZC is

used for configuration of the radio. See “ThirdPartyConfig” on page B-8 for details.

• Radio Type: Indicates the type of radio installed in the device, e.g. “ABG” when an

802.11a/b/g radio is installed.

• Reg. Domain: Indicates the regulatory domain (e.g. ETSI, FCC or TELEC) for which

the radio is configured. “Worldwide” means that the radio can be used in any domain.

• Status: Indicates if the radio is associated to an access point. If this is not the case,

Status indicates the radio status.

1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 371 372

Sin comentarios

Psion Teklogix 7535 G2 Manual de usuario Pagina 261