
Chapter 5: Configuration
Ports
148 Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Parity
This parameter determines the type of parity checking used on the data going through the
tether port. Double-tapping on this option displays a pop-up window in which you can
choose the appropriate Parity.
Stop Bits
This parameter specifies the number of stop bits—1, 1.5 or 2—used for asynchronous
communication.
5.10.4.2 Console Port (COM3)
The console port is accessed via the docking connector on the bottom of the 7535 G2. Only
the Portable Docking Module (PDM) provides access to the console port through a DE-9
interface.
Figure 5.6 Console Port Settings
Enabled
This parameter must be set to on in order for the 7535 G2 to recognize the attached device
as a decoded bar code scanner.
Baud
Refer to page 147 for details.
Comentarios a estos manuales