Psion Teklogix 7535 G2 Manual de usuario descargar pdf (Pagina 169)

Chapter 5: Configuration

Bar Codes

Psion Teklogix 7535 G2 Hand-Held Computer User Manual 139

5.10.1 Bar Codes

5.10.1.1 Scanner

The drop-down menu to the right of the Scanner option allows you to choose configurations

for one of the following scanner types, depending on what is installed in/on your hand-held:

Decoded (internal), Decoded (Intermec ISCP), Imager and Non-decoded.

The symbologies listed in the Barcodes tab change to reflect the scanner you choose and the

bar codes it supports. Always defer to your bar code scanner’s programming manual when

in doubt about the availability or settings for any parameter.

Keep in mind that some bar code types are only available when an internal imaging scanner

is installed. All internal scanners can be configured using these dialog boxes. External, non-

decoded scanners are also configured through the Scanner Properties dialog box.

However, external decoded scanners must be configured by scanning special configuration

bar codes. In these cases, the scanner manufacturer provides programming manuals for con-

figuration purposes.

Note: Your 7535 G2 comes preconfigured from the factory for internal scanner types. The

type of scanner installed can be determined from the System icon in the Control

Panel, under the System Properties tab.

Important: To improve the decode speed and performance, enable (set to ‘on’) only

those codes that are required by the application.

For information on configuring the bar code symbologies, see Appendix C:

“Bar Code Settings”.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 371 372

Sin comentarios

Psion Teklogix 7535 G2 Manual de usuario Pagina 169