Psion Teklogix 9160 G2 Manual de usuario descargar pdf (Pagina 379)

100

101

Appendix B: Security Settings on Wireless Clients/RADIUS Server

Configuring WPA/WPA2 Personal (PSK) Security On A Client

Psion Teklogix 9160 G2 Wireless Gateway User Manual B-29

Click OK on all dialogs to close and save your changes.

4. To complete the client configuration you must now obtain a certificate from the

RADIUS server and install it on this client. For information on how to do this see

“Obtaining A TLS-EAP Certificate For A Client” on page B-35.

Logging On To The Wireless Network With A WPA Client Using A Certificate

WPA clients should now be able to connect to the access point using their TLS certificates.

The certificate you installed is used when you connect, so you will not be prompted for

logon information. The certificate is automatically sent to the RADIUS server for authenti-

cation and authorization.

B.8 Configuring WPA/WPA2 Personal (PSK) Security On A Client

Wi-Fi Protected Access (WPA) with Pre-Shared Key (PSK) is a Wi-Fi Alliance subset of

IEEE 802.11i, which includes Temporal Key Integrity Protocol (TKIP), Advanced Encryp-

tion Algorithm (AES), and Counter mode/CBC-MAC Protocol (CCMP) mechanisms. PSK

employs a pre-shared key for an initial check of client credentials.

If you configured the 9160 G2 Wireless Gateway to use WPA/WPA2 Personal (PSK) secu-

rity mode . . .

Table B.15 Smart Card Or Other Certificate Properties Settings

Validate Server Certificate

Enable

this option (click to check the box).

Certificates

In the certificate list shown, select the

certificate

for this client.

1 2 ... 374 375 376 377 378 379 380 381 382 383 384 ... 435 436

Comentarios a estos manuales

Sin comentarios

Psion Teklogix 9160 G2 Manual de usuario Pagina 379

Comentarios a estos manuales