Psion Teklogix 9160 G2 Manual de usuario descargar pdf (Pagina 371)

Appendix B: Security Settings on Wireless Clients/RADIUS Server

IEEE 802.1x Client Using EAP/TLS Certificate

Psion Teklogix 9160 G2 Wireless Gateway User Manual B-21

1. Configure the following settings on the Association tab on the Network Properties

dialog.

2. Configure these settings on the Authentication tab.

3. Click Properties to bring up the Smart Card or other Certificate Properties dialog

and enable the Validate server certificate option.

Click OK on all dialogs to close and save your changes.

4. To complete the client configuration you must now obtain a certificate from the

RADIUS server and install it on this client. For information on how to do this see

“Obtaining A TLS-EAP Certificate For A Client” on page B-35.

Connecting To The Wireless Network With An IEEE 802.1x Client Using A Certificate

IEEE 802.1x clients should now be able to connect to the access point using their TLS cer-

tificates. The certificate you installed is used when you connect, so you will not be prompted

for logon information. The certificate is automatically sent to the RADIUS server for au-

thentication and authorization.

Table B.7 Association Settings

Network Authentication

Open

Data Encryption

WEP

Note: An RC4 stream cipher is used to encrypt the frame body and cyclic redundancy

checking (CRC) of each IEEE 802.11 frame. This is the same encryption algorithm as

is used for Static WEP; therefore, the data encryption method configured on the client

for this mode is WEP.

This key is provided for

me automatically

Enable

(click to check) this option.

Table B.8 Authentication Settings

Enable IEEE 802.1x authentication for this network

Enable

(click to check) this option.

EAP Type

Choose

Smart Card or other Certificate

Table B.9 Smart Card Or Other Certificate Properties Settings

Validate Server Certificate

Enable

this option (click to check the box).

Certificates

In the certificate list shown, select the

certificate

for this client.

1 2 ... 366 367 368 369 370 371 372 373 374 375 376 ... 435 436

Comentarios a estos manuales

Sin comentarios

Psion Teklogix 9160 G2 Manual de usuario Pagina 371

Comentarios a estos manuales