Psion Teklogix 9160 G2 Manual de usuario descargar pdf (Pagina 103)

Chapter 8: Channel Management

Viewing Last Proposed Set Of Changes

Psion Teklogix 9160 G2 Wireless Gateway User Manual 79

8.3.2.1 Update Current Channel Settings (Manual)

You can run a manual channel management update at any time by clicking Update under

the Current Channel Settings display.

8.3.3 Viewing Last Proposed Set Of Changes

The Last Proposed Set of Channel Changes shows the last channel plan. The plan lists all

access points in the cluster by IP Address, and shows the current and proposed channels for

each AP. Locked channels will not be re-assigned and the optimization of channel distribu-

tion among APs will take into account the fact that locked APs must remain on their current

channels. APs that are not “Locked” may be assigned to different channels than they were

previously using, depending on the results of the plan.

8.3.4 Configuring Advanced Settings (Customizing/Scheduling Channel Plans)

If you use Channel Management as provided (without updating Advanced Settings), chan-

nels are automatically fine-tuned once every hour if interference can be reduced by 25% or

more. Channels will be re-assigned even if the network is busy. The appropriate channel sets

will be used (‘b/g’ for APs using IEEE 802.11b/g and ‘a’ for APs using IEEE 802.11a).

Locked

Click

Locked

if you want to this access point to remain on the current channel.

When the “Locked” checkbox is checked (enabled) for an access point, automated channel management

plans will not re-assign the AP to a different channel as a part of the optimization strategy. Instead, APs with

locked channels will be factored in as requirements for the plan.

If you click

Update

, you will see that locked APs show the same channel for “Current Channel” and “Pro-

posed Channel”. Locked APs will keep their current channels.

Table 8.1 Current Channel Settings

Field Description

Table 8.2 AP’s Channel Plan

Field Description

IP Address

Specifies the

IP Address

for the access point.

Current

Indicates the radio channel on which this access point is currently broadcasting.

Proposed

Indicates the radio channel to which this access point would be re-assigned if the Channel Plan is executed.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 435 436

Sin comentarios

Psion Teklogix 9160 G2 Manual de usuario Pagina 103