Psion Teklogix 9160 G2 Manual de usuario descargar pdf (Pagina 375)

100

101

Appendix B: Security Settings on Wireless Clients/RADIUS Server

WPA/WPA2 Enterprise (RADIUS) Client Using EAP/PEAP

Psion Teklogix 9160 G2 Wireless Gateway User Manual B-25

1. Configure the following settings on the Association and Authentication tabs on the

Network Properties dialog.

2. Configure this setting on the Authentication tab.

3. Click Properties to bring up the Protected EAP Properties dialog and configure the

following settings.

4. Click Configure to bring up the EAP MSCHAP v2 Properties dialog.

On this dialog, disable (click to uncheck) the option to Automatically use my Windows

logon name . . . etc. so that upon logon you will be prompted for user name and

password.

Click OK on all dialogs (starting with the EAP MSCHAP v2 Properties dialog) to close

and save your changes.

Table B.10 Association Settings

Network Authentication

WPA

Data Encryption

TKIP

AES

depending on how this option is configured on the access point.

Note: When the Cipher Suite on the access point is set to Both, then TKIP clients

with a valid TKIP key and AES clients with a valid CCMP (AES) key can asso-

ciate with the access point. For more information, see Online Help on the

access point.

Table B.11 Authentication Settings

EAP Type

Choose

Protected EAP (PEAP)

Table B.12 Protected EAP Properties Settings

Validate Server Certificate

Disable

this option (click to uncheck the box).

Note: This example assumes you are using the Built-in Authentication server on the

AP. If you are setting up EAP/PEAP on a client of an AP that is using an exter-

nal RADIUS server, you might certificate validation and choose a certificate,

depending on your infrastructure.

Select Authentication Method

Choose

Secured password (EAP-MSCHAP v2

1 2 ... 370 371 372 373 374 375 376 377 378 379 380 ... 435 436

Comentarios a estos manuales

Sin comentarios

Psion Teklogix 9160 G2 Manual de usuario Pagina 375

Comentarios a estos manuales