Psion Teklogix 9160 G2 Manual de usuario descargar pdf (Pagina 234)

Chapter 20: Wireless Distribution System

Updating Settings

210 Psion Teklogix 9160 G2 Wireless Gateway User Manual

The MAC address for MyAP1 (the access point you are currently viewing) will show as

the “Local Address” at the top of the page.

3. Configure a WDS interface for data exchange with MyAP2.

Start by entering the MAC address for MyAP2 as the “Remote Address” and fill in the

rest of the fields to specify the network (guest or internal), security, and so on. Save the

settings (click Update).

4. Navigate to the radio settings on the Administration Web pages (Manage > 802.11

Advanced Settings) to verify or set the mode and the radio channel on which you

want MyAP1 to broadcast.

Remember that the two access points participating in the link, MyAP1 and MyAP2,

must be set to the same Mode and be transmitting on the same channel.

For our example, let’s say we’re using IEEE 802.11b Mode and broadcasting on

Channel 6. (We’d choose Mode and Channel from the drop-down menus on the

Radio tab.)

5. Now repeat the same steps for MyAP2:

• Open Administration Web pages for MyAP2 by using MyAP2’s IP address in

aURL.

• Navigate to the WDS tab on MyAP2 Administration Web pages. (MyAP2’s

MAC address will show as the “Local Address”.)

• Configure a WDS interface for data exchange with MyAP1, starting with the

MAC address for MyAP1.

• Navigate to the radio settings for MyAP2 to verify that it is using the same mode

and broadcasting on the same channel as MyAP1. (For our example Mode is

802.11b and the channel is 6.)

• Be sure to save the settings by clicking Update.

20.4 Updating Settings

To update WDS settings:

1. Navigate to the WDS tab page.

2. Configure the WDS settings as required.

3. Click the Update button to apply the changes.

1 2 ... 229 230 231 232 233 234 235 236 237 238 239 ... 435 436

Sin comentarios

Psion Teklogix 9160 G2 Manual de usuario Pagina 234