Psion Teklogix 9160 G2 Manual de usuario descargar pdf (Pagina 125)

Chapter 10: Configuring Security

Broadcast SSID, Station Isolation, And Security Mode

Psion Teklogix 9160 G2 Wireless Gateway User Manual 101

Table 10.5 Security Settings

Field Description

Broadcast SSID

To enable the Broadcast SSID, select the checkbox directly beside it. By default, the access point broadcasts

(allows) the

Service Set Identifier

(

SSID

) in its beacon frames.

You can suppress (prohibit) this broadcast to discourage stations from automatically discovering your access

point. When the AP’s broadcast SSID is suppressed, the network name will not be displayed in the List of

Available Networks on a client station. Instead, the client must have the exact network name configured in the

supplicant before it will be able to connect.

Station Isola-

tion

To enable station isolation, select the checkbox directly beside it.

• When Station Isolation is disabled, wireless clients can communicate with one another normally

by sending traffic through the access point.

• When Station Isolation is enabled, the access point blocks communication between wireless cli-

ents. The access point still allows data traffic between its wireless clients and wired devices on the

network, but not among wireless clients. The traffic blocking extends to wireless clients connected

to the network via WDS links; these clients cannot communicate with each other when Station

Isolation is on. See Chapter 20: “Wireless Distribution System” for more information about WDS.

Security Mode

Select the

Security Mode

. Select one of the following:

• “None (Plain-text)” on page 102.

• “Static WEP” on page 103.

• “IEEE 802.1x” on page 108.

• “WPA Personal” on page 111.

• “WPA Enterprise” on page 113.

For a Guest network, the only security mode that can be applied is “None (Plain-text)”. (For more information,

see Chapter 14: “Setting Up Guest Access”.)

Security modes other than “None (Plain-text)” apply only to configuration of the “Internal” network.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 435 436

Sin comentarios

Psion Teklogix 9160 G2 Manual de usuario Pagina 125