Psion Teklogix PrintAbout MP2000 Especificaciones descargar pdf (Pagina 39)

Mt3 Emulation

Selecting Mt3 Emulation allows applications written for the PTX Print series printers to operate properly.

When using this emulation in an MLP3040 or PrintAbout MP 2000, the printer matches the print width of the

Printek Mt3.

For information on selecting emulations using Escape Sequences, please refer to “

Selecting Emulations” on

page

3. For information selecting emulations through the printer’s control panel set up, please refer to the

printer’s Operator’s Manual.

The following summary lists the commands supported when Mt3 Emulation is selected. For more detailed

information, please refer to the MLP Programmer’s Manual.

Note: Items marked with an asterisk (*) are Printek extensions. Refer to the Printek Emulation section of

this manual.

Communications (RS-232C Serial Interface Only)

End of Text ETX

Acknowledge (Transmitted by Printer) ACK

Printer Idle (Transmitted by Printer) EOT

Transmitter On (Transmitted by Printer) XON (DC1)

Transmitter Off (Transmitted by Printer) XOFF (DC3)

Character Size and Line Spacing

Select Character Pitch ESC k n

Set Printer to 12 cpi SO

Set Printer to 21 cpi SI

Set Printer to 21 cpi NORM (DC4)

Double High On FS

Double High Off GS

Set Text Line Spacing ESC a n, ESC A n

Character Attributes

Select Emphasized Mode ESC U n

Character Sets

Select Extended Character Set ESC F n

Horizontal Position

Carriage Return CR

Backspace BS

Horizontal Tab HT

Set Horizontal Margins * ESC H l r

Vertical Position

Line Feed LF

Variable Size Line Feed ESC J n

Variable Size Reverse Line Feed ESC Q J n

Vertical Tab VT

Form Feed (ESC E *) FF, ESC E

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 60 61

Sin comentarios

Psion Teklogix PrintAbout MP2000 Especificaciones Pagina 39