Psion Teklogix PrintAbout MP2000 Especificaciones descargar pdf (Pagina 32)

Printek Emulation

Reset ESC c

ESC * 0

Deletes all data in the printer’s input buffer and resets the printer to power up default values. Refer to “Printer

Reset Conditions

” on page 55 for more information.

Escape Sequence: ESC c

Hexadecimal: 1B 63

Escape Sequence: ESC * 0

Hexadecimal: 1B 2A 00

Turn Printer Off ESC * 1

Causes the printer to turn itself off

Escape Sequence: ESC * 1

Hexadecimal: 1B 2A 01

Printer Status Commands

Print Battery Status ESC P ^

This command will cause the printer to print the current battery voltage and charge status followed by a

Carriage Return and Line Feed.

If a partial line exists in the buffer, it will be printed prior to printing the battery information.

Escape Sequence: ESC P ^

Hexadecimal: 1B 50 5E

Query Printer Status STX

SYN

Each of these commands returns character strings which provide information regarding the current print buffer

status and the magnetic card reader status. Additionally, SYN will return the current battery voltage.

Each status is returned as an escape sequence and four ASCII hexadecimal digits followed by a Carriage Return

and Line Feed. The hexadecimal digits are nibbles that have been “OR’ed” with 0x30. The statuses returned

for each command are as follows:

Command Returned Strings Comment

STX ESC B b1 b2 b3 b4 CR LF

ESC M m s1 s2 t CR LF

Print Buffer Status

MCR Status

SYN ESC B b1 b2 b3 b4 CR LF

ESC M m s1 s2 t CR LF

ESC V v1 v2 v3 v4 CR LF

Print Buffer Status

MCR Status

Battery Voltage Status

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 60 61

Sin comentarios

Psion Teklogix PrintAbout MP2000 Especificaciones Pagina 32