Psion Teklogix PrintAbout MP2000 Especificaciones descargar pdf (Pagina 15)

Printek Emulation

Horizontal Tab HT

Advances to the next horizontal tab stop. If no tab stop exists between the active column and the right margin,

the print position will advance to the beginning of the next line.

Horizontal tab stops are associated with columns, not absolute physical positions. Changing the character

spacing or font will change the physical position of the tab stops. Default tab stops are set to every fourth

column, i.e. 5,9,13,17,21,25,29,33,37 ….

Control code: HT

Hexadecimal: 09

Set Horizontal Margins ESC H l r

Sets the left and right margins in millimeters. l and r may be set from zero up to ½ the line length.

Example: The following escape sequence will set both the left and right margins to 10mm (0.394”).

Escape Sequence: ESC H 10 10

Hexadecimal: 1B 48 0A 0A

Vertical Position

Line Feed LF

Causes the current line to be printed and/or advances the paper to the next line. The total distance the paper is

advanced is based on the vertical size of the current font plus the Text Line Spacing.

A Carriage Return is also performed which places the current print position at the beginning of the next line.

Note that either a Carriage Return (CR) or a Line Feed (LF) will cause both functions to be performed.

However, a Carriage Return and Line Feed “pair” (CRLF) will only perform a single line feed.

Control code: LF

Hexadecimal: 0A

Variable Size Line Feed ESC J n

Causes paper to be moved forward n x 0.125mm. 0 ≤ n ≤ 255.

A Carriage Return is also performed which places the current print position at the beginning of the next line.

Example: The following escape sequence performs a line feed of five millimeters ( 5 ÷ 0.125 ).

Escape Sequence: ESC J 40

Hexadecimal: 1B 4A 28

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 60 61

Sin comentarios

Psion Teklogix PrintAbout MP2000 Especificaciones Pagina 15