Psion Teklogix netpad Manual de usuario Pagina 160

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 230
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 159
Chapter 7: Configuring Communications
netpad Bluetooth Settings
134
Psion Teklogix netpad Windows CE .NET 4.2 User Manual
The Authenticate and Encrypt options can be changed only before activation. To
change those after activation, deactivate the service first, then change the options.
Once a service is activated, all the information regarding the service, including the
RFCOMM channel number, is saved in the registry. (Some remote devices may
change their RFCOMM channel numbers when they reboot, so your saved setting
may not work when the remote device is rebooted. In that case, you must deactivate
the service and reactivate it to detect the current RFCOMM channel.)
Set PIN
PINs can be set for each device by pressing the Set PIN button in the Devices menu,
or you can skip this step and try to connect to the device first (see page 135).
Important: The remote device must have authentication enabled, otherwise
the PIN authentication will fail.
Highlight a device, click on the Set Pin button, and enter the PIN.
You will receive a message, either that the PIN has been successfully validated, or
the warning message shown below.
Vista de pagina 159
1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 229 230

Comentarios a estos manuales

Sin comentarios