Psion Teklogix 7525C Manual de usuario Pagina 299

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 364
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 298
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual 269
Chapter 8: Expansion Modules
Enabling The SE 1223HP Scanner
Fit the scanner module over the back of the WORKABOUT PRO
it
replaces the back plate of the unit.
Fasten the module in place with the screws provided. Tighten the screws to
a torque of 3 lbs-in (3kgf-cm).
Slide the SW1401 power switch to the right to turn power back on, and
replace the end-cap, backplate and battery. Tighten the end-cap screws to a
torque of 3 lbs-in (3kgf-cm).
Figure 8.10 Scanner Module Installed In WORKABOUT PRO
8.1.6.1 Enabling The SE 1223HP Scanner
Simultaneously, press and hold down the <BLUE> <ENTER> and left
<SCAN> keys for a minimum of 6 seconds. A
Command> prompt is
displayed on the WORKABOUT PRO screen.
Type s to display the
Scanner> prompt. A list of supported scanners is
displayed.
Type 2 and press <ENTER> to activate scanner type SE 1223HP.
At the
Command> prompt, type 1 (one) to reboot the unit to
Windows Mobile 2003 SE.
8.1.7 Installing An SE 923HP Scanner
Warning: Anti-static devices MUST BE USED during the installation of
this scanner module. If unavailable, discharge static from your
body by touching a grounded metallic object before
opening any
covers on the unit.
Vista de pagina 298
1 2 ... 294 295 296 297 298 299 300 301 302 303 304 ... 363 364

Comentarios a estos manuales

Sin comentarios