Psion Teklogix Vehicle-Mount Computer 8515 Manual de usuario Pagina 146

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 188
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 145
Chapter 6: Peripheral Devices & Accessories
Linking An 8515 To An Ethernet Network
126 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
6.3 Linking An 8515 To An Ethernet Network
A USB-Ethernet adaptor cable—model number WA4010-G1—is used to connect the 8515
to an Ethernet network.
Figure 6.1 USB-Ethernet Adaptor Cable
Insert the adaptors USB connector into the Host USB port on the 8515.
Connect your network Ethernet cable to the Ethernet port on the adaptor cable.
6.3.1 Network Access
The 8515 automatically loads the appropriate drivers to communicate with the USB-Ether-
net converters.
Network Addressing
The host application uses standard TCP/IP protocol to name, locate, and communicate with
a specific 8515 on the network.
If a link is established between an 8515 and a host, the application on the host and on the
vehicle-mount must have a recovery mechanism in the event that the 8515 is disconnected,
interrupting the link.
6.4 8515 Mounting Accessories: Installing The RAM Mounting Kit
The 8515 is installed using an articulating RAM Mount (Model MT34XX – 4 in. or 12 in.
arm) secured to either a Vesa or circular base.
Ethernet Port
USB
Connector
Vista de pagina 145
1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 187 188

Comentarios a estos manuales

Sin comentarios