Psion Teklogix 7535 G2 Manual de usuario Pagina 285

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 318
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 284
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual B-5
Appendix B: Wireless Wide Area Network (WWAN)
Advanced Information
Searching for GPRS
Ready to connect
If the modem loses the connection to the GSM network, the following states are
repeated: Searching for network, Registered on network, Searching for packet data,
and Ready to connect.
Error States
The following temporary error states (i.e., these states may disappear without inter-
action) may be displayed:
Emergency calls only.
The modem has found a network but is not allowed to register (e.g. no
roaming agreement between networks). The modem keeps searching for
another network.
No network found.
A network is not currently available. The modem continues searching for
a network.
Packet data not available.
The current network does not support a packet data service.
Packet data not allowed.
The modem is not allowed to use the packet data service on the current
network (e.g. no GPRS roaming agreement between network; a roaming
agreement for voice may still be in place). It is also possible that you do not
have a subscription for GPRS at all.
The remaining error states are permanent:
SIM is missing.
The SIM card is missing. After the SIM has been inserted a warm boot may
be required.
SIM failure.
The SIM card is permanently disabled (e.g. because the wrong PUK has
been entered too many times). A new SIM is needed.
Modem failure.
The modem did not respond to commands as expected. If a warm boot does
not clear this condition, the modem may need to be replaced.
NDIS error.
An internal software error has occurred. If a warm boot does not clear this
condition, Psion Teklogix technical support may need to investigate further.
Vista de pagina 284
1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 317 318

Comentarios a estos manuales

Sin comentarios