Psion Teklogix PowerScan M8300 Manual de usuario descargar pdf (Pagina 40)

POWERSCAN

M8300 SYSTEM AND NETWORK LAYOUTS

3.2.3 Master BC-8060 Network Troubleshooting

Two diagnostic strings can be sent via RS-232 from the Host to the Master cradle in

order to have feedback about the network itself.

#+LSlave

Returns a list of all the Slaves recognized at boot up.

Example:

In a network where the Master cradle has address 0188 and one Slave cradle with

address 0001, the response is:

188

#+Alive<xxxx>

Executes a continuous Alive request to the slave xxxx in order to monitor the

performance of the connection. A diagnostic message is displayed on the Host.

Example:

If this command is sent for slave cradle with address 0032, the response is:

/*32: BC-80X0 SOFTWARE RELEASE 1.00 20/10/2006*/

if there are no communication errors

/*32: FAIL*/

if there are communication errors.

To exit from this command, reset the system by cycling power to the Master cradle.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 219 220

Sin comentarios

Psion Teklogix PowerScan M8300 Manual de usuario Pagina 40